[Bendpak: 10AP-168] 10,000lbs Cap. Two Post Overhead Car Lift

Lifting Capacity:	10,000lb
(A) Rise:	69"
(B) Rise + Pad:	72.25"
(D) Min Height + Pad:	4"
Time to Full Rise:	45 Seconds
(E) Height Overall:	168"
(F) Width Overall:	135" or 145"
(G) Outside Columns:	127" or 137"
(H) Inside Columns:	108.25" or 118.25"
(I) Drive-Thru Clearance:	92" or 102"
(J) Floor to overhead switch:	163.5"
(K) Front arm reach (MIN):	22"
(K) Front arm reach (MAX):	47.5"
(L) Rear arm reach (MIN):	29.5"
(L) Rear arm reach (MAX):	57"
Max load per arm:	2,500lb
Noise:	<70 dB
Shipping Dimensions:	150" x 24" x 30" (3,810 mm x 610 mm x 762 mm)
Weight:	1840.00lb

 

The automotive world is zooming ahead at full throttle, and BendPak's AP series of two-post lifts is leading the charge! Built for the heavyweights and extreme use, these lifts put operator safety and efficiency in the fast lane. The star of the show, the 10AP-168, boasts a towering 168-inch height, giving mechanics all the elbow room they could dream of.

 

BendPak's AP Series is like a customizable buffet, offering designs that fit a smorgasbord of vehicle lifting needs, thanks to their snazzy BI-METRIC™ arms. Say goodbye to pesky maintenance costs and hello to productivity that zooms!

 

Safety? Oh, it’s a top priority! With the Automatic Swing Arm Restraint System (ASARS), you won’t have to worry about surprise vehicle shimmies. Plus, those innovative triple-telescoping swing arms ensure your lifting game is always on point. And for those low-riders? The Low-Pro™ swing arms are here to save the day without a scratch!

 

With an automatic safety lock system and adaptable swing arm setups, BendPak's AP series is revving up operations, making it a total game-changer for auto repair shops. Buckle up and experience the future of automotive lifting with these revolutionary solutions!

 

• Durable powder coat finish
• Expandable top beam accommodates wide or narrow drive-thru configurations
• Double-telescoping screw pads
• Padded overhead safety shutoff bar
• Exclusive Bi-Metric™ arm design
• Single-point safety release
• Drop-end arms provide a lower pad height
• Dual hydraulic direct-drive cylinders
• Oversized 53" & 59" tall carriages for superior strength and durability
• Electric / hydraulic HVLP power system
• Self-lubricating dura-glide UHMW polyethylene bearing system
• Safety locks in each column spaced every 3"
• Automatic arm restraints withstand over 2000-pounds of side force
• 3/8" High-strength multi-strand galvanized steel equalizing cable
• Oversized cable sheave diameter reduces cable fatigue
• Four triple-telescoping arms
• ALI certified

 

• Local Installation (Phoenix-Metro): $850  (See our Install Map for additional installation costs outside of the Phoenix-Metro Area).
• Shipping: Free Shipping

 

Open Warranty

 

Open Manual