top of page
[Bendpak MDS-6EXT] 6,000lb Open Center Mid-Rise Scissor Lift (Extended Platform)

[Bendpak MDS-6EXT] 6,000lb Open Center Mid-Rise Scissor Lift (Extended Platform)

SKU: 5175192
$7,595.00Price

* A forklift is required on site for unloading any lift being shipped.

Quantity
  • Specs:

    Lifting Capacity:
    14,000lb
    Max Capacity / Front Axle: 7,000lb
    Max Capacity / Rear Axle: 7,000lb
    (A)Min. Runway Height: 7.75"
    (B)Max. Rise: 70"
    (C)Max. Lifting Height:
    77.5"
    Time to Full Rise:
    60 seconds
    (D)Overall width (FRONT):
    143.25”
    (E)Overall Width (REAR): 130”
    (F)Outside Length: 215.5"
    (G)Overall Length:
    244.5"
    (H)Height of Columns (FRONT): 103.25"
    (I)Height of Columns (REAR): 92”
    (J)Width Between Columns (FRONT):               123”
    (K)Width Between Columns (REAR): 120”
    (L)Drive-Thru Clearance: 98”
    (M)Runway Width: 20"
    (N)Length of Runways: 197.5"
    (O)Width Between Runways:
    42"
    (P)Runway Centerline: 65"
    (Q)Outside Edge of Runways: 85"
    Locking Positions: 15
    Lock Spacing:
    Every 4"
    Motor: 220 VAC / 60 Hz / 1 Ph
    Noise: 45dB
    Shipping Weight: 3,238lb
    Dimensions:
    221'' x 22'' x 35''

     

    Minimum Wheelbase:

    Rated Capacity:              
    140"
    75% Capacity:
    120"
    50% Capacity: 100"
    25% Capacity:
    80"

     

     

  • Description:

    Introducing the MDS-6EXT Mid-Rise Lift, specifically designed for the next generation of electric vehicles with longer lifting points. Perfect for long-wheelbase models, this lift features an open-center design and the option to add or remove extended approach ramps, accommodating low-stance vehicles effortlessly. Equipped with a unique pneumatic kicker, it provides a strong lift from a collapsed position, while four hydraulic cylinders ensure even lifting. Safety is paramount with solid-steel lock bars and a push-button lock release system. The durable rubber contact blocks and Zerk grease fittings guarantee longevity with minimal maintenance. Choose from three locking positions for optimal convenience and efficiency. Each lift comes with comprehensive installation and maintenance instructions for seamless operation. Upgrade your workshop with the MDS-6EXT and experience effortless vehicle lifting.

     

  • Features:

    • Each lift platform features four solid steel-scissor frame support bars, making it one of the strongest mid-rise lifts in its class
    • Dual master hydraulic cylinder combines with dual equalizing cylinders to provide a safe and level 6,000 pound lifting capacity
    • Solid‐steel safety lock bars engage automatically during ascent
    • Convenient stainless‐steel pneumatic cylinders simultaneously release safety locks during descent with a simple push of a button. (NOTE: Requires min. 50 psi, 10 CFM air source at time of installation.)
    • A push‐button safety lock release system is operated away from the lift and allows operators to safely deactivate the locks without the need to push or pull cumbersome release bars or lock release handles
    • Hinge point features Zerk grease fitting to allow lubrication at critical wear areas
    • Comes standard with four durable cushioned‐rubber contact blocks, permitting fast vehicle setup
    • Three locking positions allow technicians to work at different working heights to increase productivity and minimize fatigue
    • Powder coat finish provides a long lasting durable finish

     

  • Delivery, Install, and Shipping:

    Local delivery (if you have lift sent to our warehouse): Free within 25 miles of Gilbert, AZ. (Contact Us for delivery to outside areas)

    Local Installation: Please contact us for install quote

    Shipping: Free Shipping

     

  • Warranty:

  • Manual:

bottom of page