XPR-10XLS

Tall techs no longer have to strain themselves while they work. The XPR-10XLS is a high-reach symmetrical two-post lift that can be customized with an optional extension kit and/or Low-Pro&trade arms. Perfect for vehicles of all sizes. A must-have tool to help taller techs stand upright while they work.

The XPR-10XLS Symmetrical Lift Offers MORE Lifting Height

With BendPak's 10,000-lb. capacity XPR-10XLS symmetrical two-post lift in your shop, most cars, trucks and SUVs will be raised quickly and effortlessly. Fully ALI Certified, this model features an extra-high lifting carriage. The taller carriage offers an extra 6″ of lift, which means vehicles can be raised a full 75″ (about 80″ with adapters). Taller mechanics will enjoy this feature, since it means they no longer have to bend, stoop, strain and even injure themselves while they spend hour after hour working underneath lifted vehicles.

There's no car lift quite like the XPR-10XLS. This is the symmetrical version (an asymmetrical version is also available), and it's ideal for shops and operators that deal mainly with vehicles whose centers of gravity are toward the center of the car. Of course, trucks and SUVs can be used with this model as well. Some prefer asymmetrical lifts because they allow a little more door clearance, while other prefer vehicles to be positions as close to the center of the lift as possible. There's no right or wrong—the choice is yours!

 

Model Description	10,000-lb. Cap. / Symmetric / Adjustable Width / Screw Pads / High Rise
Features	Lift arms shown with optional foot guards 10,000-lb. lifting capacity Expandable top beam accommodates wide or narrow configuration Double-telescoping screw pads offer increased versatility Padded overhead safety shutoff bar Single-piece columns Dual hydraulic direct-drive cylinders Automatic arm restraints Lowered arm tube supports Maintenance-free UHMW load bearings Oversized 59″ tall carriage for superior strength and durability Electric / hydraulic power system Large, 17″ x 19″ A36 steel base plate Self-lubricating dura-glide UHMW polyethylene bearing system Single-point safety release Safety locks in each column spaced every 3″ Automatic overhead shutoff Plated arm restraints and arm pins for rust prevention Heavy-duty 1/2″ aircraft-quality equalizer cables Oversized cable sheave diameter reduces cable fatigue 4-piece 63 mm stackable adapter set comes standard ALI ​Certified
Configuration	Symmetric Clearfloor
Adjustable Width	Yes
Lifting Capacity	10,000 lbs. (4,536 kg)
Rise	75" (1,905 mm)
Rise + Pad	79.75" (2,026 mm)
Rise + Pad + Adapter	82.25" (2,089 mm)
Minimum Pad Height	4.75" (121 mm)
Time to Full Rise	50 seconds
Height Overall	157" (3,988 mm)
Width Overall	132" (3,353 mm) or 145" (3,683 mm)
Outside Columns	126.75" (3,219 mm) or 139.75" (3,550 mm)
Inside Columns	105.5" (2,680 mm) or 118.5" (3,010 mm)
Drive-Thru Clearance	93" (2,362 mm) or 106" (2,692 mm)
Floor to Overhead Switch	147" (3,734 mm)
Front Arm Reach (MIN)	25.5" (648 mm)
Front Arm Reach (MAX)	49.5" (1,257 mm)
Rear Arm Reach (MIN)	32.25" (819 mm)
Rear Arm Reach (MAX)	52.5" (1,334 mm)
Max Load per Arm	2,500 lbs. (1,134 kg)
Floorplate Height	N/A
Floorplate Width	N/A
Screw Pad Adjustment	2" (51 mm)
Power Unit	220 VAC / 60 Hz / 1 Ph
Shipping Dimensions	162" x 24" x 34"
Noise	45 dB